[ad_1]
Static cling has become an increasingly popular home improvement solution in recent years. Part of this is due very much to the ease of installation for the do-it-yourself homeowner. The film can be applied to many surfaces, ranging from glass windows, doors and sometimes other smooth surfaces.
This is a job that, depending on the size of the print, can be done by one person. If the print is large, then it might be worth asking a friend to lend a hand.
To get started, you’ll need a squeegee or other object to smooth out bubbles under the film, a spray bottle and some towels. In addition, you may need a razor to trim the window scene should there be excess. However, some manufacturers allow you to print your window scene directly onto material cut to your exact, custom specifications.
The first step of the process is to thoroughly clean the window to remove all dirt and debris. Ensuring you have a clean surface will ensure that the static cling window film will adhere best to the window. To test the cleanliness of the window, you can let it dry after cleaning and look for streaking. If there are, simply clean the window again.
Once you’ve cleaned the window, use your spray bottle to spray water onto the window. Make sure you wet the surface well enough as it will help make applying the film easier. Don’t worry – excess water will be squeezed out from beneath the window scenes.
After wetting the window, pull the backing off of the static cling window film. If you’re film is small in size, then you can completely remove it from the backing. However, for large prints, it is suggested that you peel the top portion off and progressively remove it as you install the window film.
On a side note, static cling window scenes are reusable. If you foresee reusing your prints in the future, it’s very important that you save the backing to reapply the scene to should you need to transport it.
Line up the top edge of the window film with the top edge of the window. Push down on the film to get it to “stick” to the window. Starting from the center, use your squeegee to apply the film. It is easiest to work from the inside out, therefore making it easier to remove and air bubbles that might have developed. Work from the inside out, from top to bottom. As you move down, remove any backing that might still be on the print.
Static cling is very forgiving during installation. If your window scene isn’t lining up perfectly, or perhaps has pesky air bubbles that won’t cooperate, simply peel the film off the window and start over. There is no adhesive on static cling, and therefore isn’t degraded by multiple applications.
After applying the cling, use a towel to wipe away excess water that was squeezed from underneath the film. It’s as simple as that! Give your window scenes a few days to completely dry, which is when you will have the best “stick”.
If you ever want to remove it, don’t worry. The removal is even easier than the installation. Simply raise a corner with your finger nail, and peel the film off diagonally across the window. That’s it.
[ad_2]
Source by Jake P Johnson
